The KR260B
The oil moisture tester is designed and manufactured according to the requirements of the People’s Republic of China standard GB/T260 “Petroleum Products Moisture Determination Law”, meets the requirements of G/JBJD6 “Technical Conditions of Petroleum Products Moisture Tester” and ASTM D95 standard. This lubricating oil moisture analyzer is suitable for the determination of the moisture content in petroleum products according to the test method specified in the GB/T260 standard, and it is also suitable for the determination of the moisture content in the lubricating grease according to the test method specified in the standard GB/T512 “Lubricating Grease Moisture Determination Method”.
Main technical features
1. The design of this instrument fully complies with the requirements of GB/T260 and G/JBJD6 standards.
2. The design of the test vessel holder is reasonable, and the installation and disassembly of the condenser tube are convenient.
3. Two sets of tests can be carried out at the same time, and external circulation of cooling water is required.
Main technical parameters:
1. Power supply: AC 220V±10%, 50Hz.
2. Electric furnace heating power: 1000W.
3. Ambient temperature: ≤35℃.
4. Relative humidity: ≤85%.
5. Power consumption of the whole machine: no more than 1100W.
Reagents of this moisture test instrument:
Solvent (initial boiling point not less than 50 degrees DC gasoline), oleic acid or stearic acid, anhydrous calcium chloride: chemically pure.
Packing size: 50*38*32 cm, weight 13kg