This automatic oil distributor newly developed by the company is a mixing oil distributor that uses the imported dynamic electronic scale to separately and accurately measure the weight of each oil sample required, with the accurate weight converted to the accurate volume for distribution of gasoline octane number or diesel cetane number reference fuel and calculation fuel using the method speci ed in ASTM D2699 and ASTM D2700.
Available standards:
ASTM D613-IP5165-GB/T386
ASTM D2699 -ISO EN 25164 -ISO 5163 -IP 237
DIN 51756-GB/T 503
ASTM D2700 -ISO EN 25163 -ISO 5164 -IP 236
GB/T5487
1. CFR standard engine with the professionally mechanical processing, to guarantee stable detection data; interchanged with the imported instrument components.
2. The imported nozzle and injector are used to ensure injection amount and injection angle to ensure stable lab data of the instrument.
3. The precision electronic control injection system is used, with the imported electric control pump to accurately control the injection advanced angle and injection amount for more stable detection data.
4. The fuel ow is adjusted and controlled by the automatic photoelectric measuring system and computer to avoid arti cial error. Stainless steel oil cup is used with strong corrosion prevention, artistic and durable.
5. The variable compression ratio plug adjusting handwheel is consistent with the structure of the imported instrument with very high universality. The laser ranging automatic reading is used without any manual interference.
6. With two-stage oil ltration and cooling technology, to eectively protect and prolong the service life of engine and shorten the single test time; as the standard con guration, the oil preheater is provided to improve the preheat eectively of the instrument.
Technical data:
– Imported dynamic scale oil distribution precision:
±0.01ON/CN or ≤0.1g
– Display: 10″color touch screen computer display
– Oil distribution capacity: 100-1000ml
– Single oil distribution speed: less than 3 minutes
– Calibration method: with calibration program
– Oil sample distribution method: full auto
– Number of fuel tanks: 6
– Machine power: <250W
– Instrument size: 500W x 750D x 1720H (mm)
– Machine weight: 86kg
Instrument features:
– 10″ color touch screen type computer man-machine intelligent
diagnosis, with the user-friendly interface.
– According to the set oil distribution amount and reference fuel ON/CN, the reference fuel can be prepared automatically by mass ratio.
– Six fuel tanks are provided to prepare octane number and cetane number standard reagent, to display the oil volume of each fuel tank in real time
– Minimize to the contact opportunity between the operator and the toxic solution to ensure the health of the operator.
– By software con guration, the total number of fuel tanks, oil type and the physical parameters can be set.
– The simple and accurate calibration program is used to calibrate the oil pump and imported dynamic scale.
– With the internal data storage, connected to the LIMS for data management.